Saber Synthetic 100

Mark R. Hansen
Independent AMSOIL Dealer

MarSyn Distributors
Toll Free (877)434-5793
E-mail

JUMP TO HOME CONTACT US E-MAIL My AMSOIL Dealer #503276

Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils

New AMSOIL Saber Professional (ATP) and Saber Outboard (ATO) Synthetic 2-Cycle Oils are specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios of these premium synthetic formulations.

Saber Professional is "Smokeless"
Saber Outboard is a very low smoke, low odor product
At 100:1, both oils produce 30 percent lower emissions than oils mixed at 50:1
Saber Professional is recommended for ISO-L-EGD applications
One mix ratio for everything eliminates confusion
Both oils are versatile and very good for many applications
Cost effective compared to oils mixed at 50:1 or richer
Saber Outboard exhibits low aquatic toxicity
Lean mix ratio prevents plug fouling and exhaust port deposits

AMSOIL 2-Cycle Oil Lineup
"The Fabulous Four"

HP Injector Synthetic 2-Cycle Oil (HPI)
Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils (ATP & ATO)
INTERCEPTOR Synthetic 2-Cycle Oil (AIT)
DOMINATOR Synthetic 2-Cycle Racing Oil (TDR)

Product Code: ATP & ATO

Product Description
AMSOIL Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils are formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oils have excellent lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

Saber Professional
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is “smokeless” and delivers as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FC or API TC is specified.

Saber Outboard
Saber Outboard (ATO) is specifically designed for outboard motors. It is also very good for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains a heavy dose of lower temperature dispersant additives that excel at preventing varnish and deposits from forming in water-cooled motors. Saber Outboard is a very low smoke, low odor, low toxicity product that produces as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1. It is ideal for trolling motors as it prevents “oil loading” and plug fouling for rapid throttle response. Operators and the environment benefit from the use of Saber Outboard. It is recommended for pre-mix use where TC-W3 or API TC is specified.

Applications
AMSOIL Saber 100:1 2-Cycle Oils are recommended for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios in severe service applications such as commercial equipment operations and racing.

TYPICAL TECHNICAL PROPERTIES Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils
	ATP	ATO
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	11.9	13.4
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	78.2	91.3
Viscosity Index (ASTM D-2270)	145	148
Pour Point °C (°F) (ASTM D 97)	-38 (-36)	-36 (-33)
Flash Point °C (°F) (ASTM D 92)	101 (214)	102 (216)
Fire Point °C (°F) (ASTM D 92)	107 (225)	106 (223)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.