AMSOIL Saber™ Synthetic 100:1
Pre-Mix 2-Cycle Oil
Saber™ Professional Synthetic 100:1 Pre-Mix
2-Cycle Oil (ATP)
AMSOIL Saber™ Professional (ATP) is formulated with exclusive AMSOIL synthetic
base oils and premium additives. Designed for lean mix ratios in two-cycle
motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to
control friction and help prevent wear, plug fouling, ring sticking and exhaust
port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and
providing improved performance in two-cycle motors since 1973. ISO-L-EGD,
JASO FD, API TC
Package sizes include:
1.5-oz Pillow Pack
1.5-oz. Pillow Packs (case of 48)
3.5-oz. Bottle
3.5-oz. Bottles (case of 12)
8-oz. Bottle
8-oz. Bottles (case of 12)
1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum
Saber Professional (ATP) is specifically designed for
small engines including, but not limited to, chain saws, lawn equipment,
blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5-
oz. bilingual (English/Spanish) container which is ideal for treating the 2
– 2.5-gallon cans of gas commonly used for storing mixed gas on the job.
Saber Professional is also very good for use in motorcycles, snowmobiles,
ATVs, jet boats and personal watercraft. Saber Professional is formulated
with high-temperature detergent additives to help prevent hard carbon
deposits from forming in these hot-operating motors. Saber Professional is
“smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed
at 50:1. Equipment operators subjected to smoke and fumes will benefit from
these low emission properties. Because one mix ratio satisfies multiple
pieces of equipment, Saber Professional eliminates mix ratio confusion.
Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or
API TC is specified.
Applications
(2-Cycle
Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal
service. Richer mix ratios may be used where desired.
| 2.6 oz. |
per 1 U.S. gallon |
50:1 |
| 8 oz. |
per 5 U.S. gallons |
80:1 |
| 1.3 oz. |
per 1 U.S. gallon |
100:1 |
| 8 oz. |
per 6 U.S. gallons |
100:1 |
|
TYPICAL TECHNICAL PROPERTIES
Saber™ Professional Synthetic
100:1 Pre-Mix 2-Cycle Oil (ATP)
|
|
Kinematic Viscosity @ 100°C, cSt
(ASTM D-445)
|
13.5 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM
D-445)
|
99 |
|
Viscosity Index (ASTM D-2270)
|
136 |
|
Pour Point °C (°F) (ASTM D-97)
|
-36 (-33) |
|
Flash Point °C (°F) (ASTM D-92)
|
114 (237) |
|
Fire Point °C (°F) (ASTM D-92)
|
114 (237) |
|
DANGER:
harmful or fatal if swallowed. Contains synthetic lubricant and
petroleum distillates. If swallowed do not induce vomiting.
Contact a physician immediately. Keep away from fire, heat and
open flame. Use with adequate ventilation. Avoid frequent or
prolonged skin contact. Flush eyes with water for 15 minutes in
case of contact. KEEP OUT OF REACH OF
CHILDREN.
|
|
