14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease
formulated for high-temperature/high-speed applications. It also provides
superior protection for low-speed bearings, a job usually reserved for
heavy-duty products. Components get the load bearing capacity of a
heavy-duty grease without sacrificing the high-temperature protection of a
multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease is designed to deliver maximum protection
in the intense environments found in racing applications. Its
high-performance anti-wear additive package helps ensure maximum component
life.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base
oil with a top-quality lithium complex thickener, known for its
extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing
Grease offers excellent low-temperature pumpability and high-temperature
consistency for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease offers excellent oxidation resistance and a
robust package of oxidation inhibitors, helping to prevent grease breakdown
and component surface damage in the high oxidizing conditions associated
with high-temperature operation.
Friction Reduction
Because it effectively reduces friction, AMSOIL Series 2000 Racing Grease
maximizes power through-put and fuel efficiency. Its superior
friction-reduction properties help ensure race vehicles operate at peak
performance.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash-out and inhibits rust
and other forms of corrosion.
Applications
AMSOIL Series 2000 Synthetic Racing Grease meets the highest performance
standards of the National Lubricating Grease Institute; GC for wheel bearing
applications and LB for chassis applications.
|
Typical Technical Properties |
|
AMSOIL Synthetic Lithium Complex Racing
Grease
|
Series 2000
Racing Grease |
NLGI
GC-LB |
| Thickener |
Lithium Complex |
NR* |
| NLGI Consistency Grade |
2 EP |
NR* |
| NLGI Performance Grade |
GC-LB |
NR* |
| Penetration (ASTM D-217)
25° C [77° F], 0.1 mm Worked 60 strokes |
265 - 295 |
220 - 340 |
| Dropping Point (ASTM
D-566) °C [77° F] |
285 [545] |
220 [428] |
| Water Washout (ASTM
D-1264) 79° C [175° F] % loss |
5.1 |
15 max |
| Oil Separation (ASTM
D-1742) 24 hr. @ 25° C [77° F], % loss |
2.8 |
10 max |
| Rust Protection (ASTM
D-1743) |
pass |
pass |
| Timken OK Load Test (ASTM
D-2509), lbs. |
60 |
NR* |
| Fortified with Moly
Compound |
no |
NR* |
| Four Ball Wear Test (ASTM
D-2266) Wear Scar Diameter, mm |
0.32 |
0.9 max |
| Compatibility with other
greases |
excellent |
NR* |
| Extreme Pressure, Four
Ball Method (ASTM D-2596) Weld Point, kgf |
400 |
200 min |
| Extreme Pressure, Four
Ball Method (ASTM D-2596) Load Wear Index, kgf |
65 |
30 min |
| High Temperature Life
(ASTM D-3527) hours |
300 |
80 min |
| Fretting Wear (ASTM
D-4170)* mg |
3.4 |
10 max |
| Elastomer Compatibility
(ASTM D-4289) Volume Change, %, GC |
21.6 |
-5 to +30 |
| Elastomer Compatibility
(ASTM D-4289) Volume Change, %, LB |
9.88 |
0 to +30 |
| Elastomer Compatibility
(ASTM D-4289) Hardness Change, durometer-A points, GC |
-3 |
+2 to -15 |
| Elastomer Compatibility
(ASTM D-4289) Hardness Change, durometer-A points, LB |
-6 |
0 to -10 |
| Leakage (ASTM D-4290), G* |
6.0 |
10 max |
| Low Temperature Torque
(ASTM D-4693) n·m, max @ -40° C [-40° F] |
2.3 |
15.5 |
| Water Spray Off (ASTM
D-4049), % max |
22.7 |
NR* |
| * NR: Not
Required for NLGI GC or LB labeling |
