14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
PRODUCT
DESCRIPTION
AMSOIL Synthetic Water Resistant Grease (GWR) is
an extreme-pressure, multipurpose grease formulated specially for wet-duty
performance. Its water washout and sprayoff resistance are ideal for wheel
bearings of vehicles and trailers frequently exposed to water, mud, snow or
ice. It is also excellent for use in plants, such as paper mills, in which
machinery undergoes frequent or prolonged exposure to water.
Water Washout and
Sprayoff Protection
AMSOIL Synthetic Water Resistant Grease derives
its superior wet-duty performance from its peerless cohesiveness and
adhesiveness. It holds together when exposed to water and clings tenaciously
to metal surfaces when wet. Components remain protected during prolonged
exposure to standing water or exposure to pressurized water.
Rust and Corrosion
Protection
AMSOIL Synthetic Water Resistant Lithium Complex
Grease protects metal surfaces from rust and corrosion, both of which may be
hastened or worsened by frequent or prolonged water contact. It seals metal
surfaces against rust and chemically fights corrosion.
High and Low
Temperature Performance
AMSOIL Synthetic Water Resistant Grease
effectively reduces friction, helping high-speed components run cooler. It
resists the damaging effects of high temperatures and oxidation so
components stay deposit-free for optimal performance and long life.
AMSOIL Synthetic Water Resistant Grease may be used in
place of separate high-temperature and lowtemperature greases.
Load Carrying and
Extreme Pressure Performance
AMSOIL Synthetic Water Resistant Lithium Complex
Grease protects components from metal-to-metal contact even under heavy
loads. Its extreme pressure additives form a shield against sustained or
sudden extreme loads for dependable protection against wear.
Service and Shelf
Life
AMSOIL Synthetic Water Resistant Grease resists
oxidation, high temperature degradation and additive depletion so
effectively, it may be used for longer service intervals than conventional
greases. AMSOIL Synthetic Water Resistant Grease also resists oil separation
and offers a long shelf life.
APPLICATION
AMSOIL Synthetic Water Resistant Grease meets the highest performance
standards set by the National Lubrication Grease Institute (NLGI), GC for
wheel bearing applications and LB for chassis applications. It may be used
in automotive wheel bearings, chassis or other applications for which an
NLGI No. 2 GC or LB grease is recommended. Its unique water resistant
formulation makes it ideal for use in components or equipment with frequent
or prolonged water exposure. AMSOIL Synthetic Water Resistant Grease is
compatible with most seal materials and most other greases.
|
TYPICAL TECHNICAL PROPERTIES |
AMSOIL Synthetic Lithium Complex
Water Resistant Grease (GWR)
|
| |
AMSOIL GWR
|
NLGI GC-LB
|
| Thickener |
Lithium Complex |
NR* |
| NLGI Consistency Grade |
2 |
NR* |
| NLGI Performance Grade |
GC-LB |
GC-LB |
| Extreme Pressure Fortified |
Yes |
NR* |
Penetration (ASTM D-217) 25°C [77°F], 0.1 mm
Unworked
Worked 60 strokes
|
265-295
265-295
|
220-340
220-340
|
| Dropping Point (ASTM D-2265) °C [°F] |
273 [525] |
220 [428] |
| Water Washout (ASTM D-1264) 80 °C [175°F] % loss |
3.5 |
15 max |
| Oil Separation (ASTM D-1742) 24 hr. @ 25°C
[77°F], % loss |
1.0 |
6 max |
| Rust Protection (ASTM D-1743) |
pass |
1 max |
| Timken OK Load Test (ASTM D-2509), lbs. |
45 |
NR* |
| Four Ball Wear Test (ASTM D-2266) Wear Scar
Diameter, mm |
0.48 |
0.6 max |
| Compatibility with other greases |
excellent |
NR* |
Extreme Pressure, Four Ball Method (ASTM D-2596)
Weld Point, kgf.
Load Wear Index, kgf.
|
315
42
|
200 min
30 min
|
Meets Disc Brake Wheel Bearing Specification:
GM 4733-M
GM 6031-M
Chrysler MS-3701
|
Yes
Yes
Yes
|
NR
NR
NR
|
| High Temperature Life (ASTM D-3527) Hours |
100 |
80 min |
| Fretting Wear (ASTM D-4170)* Mg |
9.2 |
10 max |
| Leakage (ASTM D-4290), g* |
1.0 |
10 max. |
| Low Temperature Torque (ASTM D-4693) n*m, max @
-40°C [-40°F] |
7.5 |
15.5 |
| Water Spray Off (ASTM D-4049), % max |
8.5 |
NR* |
| *NR: Not Required
for NLGI GC or LB labeling |
