|
AMSOIL Engine and Transmission Flush (FLSH) helps restore fuel
economy, increase operating efficiency and reduce emissions in gasoline
and diesel engines, and automatic transmissions. Its potent,
detergent-based formula cleans sludge and deposit build-up, promoting
lower operating temperatures and reduced oil consumption. AMSOIL Engine
and Transmission Flush is safe on parts and can be easily disposed of
with waste oil.
Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but over time they
gather harmful deposits that cause power and performance loss.
Stop-and-go driving, prolonged idling, short trips that do not allow the
engine to reach full operating temperature, towing, the ingestion of
airborne dirt, fuel dilution, water condensation and oxidized oil all
can promote sludge build-up in motor oil and transmission fluid. As it
settles, sludge clogs narrow oil passages, restricting oil flow to vital
parts, especially the upper valve train area.
In transmissions, deposits can form on clutch plates, causing
hesitation and erratic shifting. Ultimately clutch glazing can set in,
reducing the life of the transmission. Deposits in engines and
transmissions can accelerate wear, causing power loss and increased fuel
consumption.
• Cleans engines and transmissions for improved efficiency, fuel
economy and lower emissions
• Prolongs equipment life
• Detergent-based formula more environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil
Installing new oil or transmission fluid into a dirty vehicle may not
be enough to remove deposits and increase efficiency. The detergents and
dispersants in some lubricants may not be able to handle leftover sludge
and deposits, and the new lubricant soon becomes unfit for service,
accelerating the formation of even more harmful deposits.
AMSOIL Engine and Transmission Flush Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush
features a multi-use formulation that dissolves and disperses sludge,
varnish and deposits in both engines and automatic transmissions. Due to
its detergent-based formulation, used AMSOIL FLSH can be easily disposed
of with waste oil, making it more user-friendly. Its advanced formula of
light base oil technology, powerful detergents and dispersants provides
safe cleaning action. AMSOIL FLSH is compatible with both petroleum and
synthetic oils, preparing poorly maintained equipment for installation
of new oil. It represents the first step toward restoring neglected
equipment to top-notch performance. AMSOIL Engine and Transmission Flush
provides the following benefits in only one treatment:
Gasoline and Diesel Engines
• Helps loosen sticky valves and rings, minimizing blow-by and
reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through sludge removal
• Easy disposal
Automatic Transmissions
• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates, helping improve
efficiency
• Promotes smoother operation and transmission life through reduced
shift delay
Applications
AMSOIL Engine and Transmission Flush is recommended for diesel and
gasoline engines, and automatic transmissions. It is not recommended for
CVT transmissions or differentials.
Directions for Use
Though it works in one treatment, AMSOIL Engine and Transmission Flush
is safe enough to be used at every oil change. If using a flushing
machine, follow the manufacturer’s recommendation. Otherwise, use the
following guidelines:
Engine: Add 16 oz. bottle of AMSOIL Engine and
Transmission Flush to engine oil fill port. Idle the engine for 10-15
minutes, then immediately drain the oil. Ensure enough time for the
system to completely
drain. Remove and replace the engine oil filter. Refill engine with new
engine oil in the viscosity grade recommended by the manufacturer.
Transmission: Engage emergency brake. Add 16 oz.
bottle of AMSOIL Engine and Transmission Flush to transmission oil fill
port. Idle for 10-15 minutes; shift through drive and reverse. Do NOT
place vehicle under heavy load. Drain entire transmission and torque
converter of fluid. FILTER MUST BE CHANGED prior to refilling with new
transmission fluid.
NOTE: It is not recommended to flush transmissions
that do not have a removable pan or access to the transmission filter.
 |
| (above) Automatic transmission clutch plates pre-cleanup.
Varnish and glazing is heavy on some of the plates. |
 |
| (above) Automatic transmission clutch plates after cleanup
with AMSOIL Engine and Transmission Flush reveal lighter glazing
and varnish. |
 |
| (above) Cylinder head pre-cleanup. Note the sludge deposits
on and around the valve springs and push rod openings. |
 |
| (above) Cylinder head after cleanup with AMSOIL Engine and
Transmission Flush. The valve springs and push rod openings are
noticeably cleaner, with fewer sludge deposits. The
manufacturer’s stamping is more easily seen. |
|
