|
AMSOIL Antifreeze & Coolant is newly formulated to
provide benefits far beyond those found in today's conventional
antifreeze and coolant products. This revolutionary formulation provides
maximum antifreeze and cooling protection in the most extreme
temperatures and operating conditions. And unlike conventional ethylene
glycol based products, which are highly toxic and even fatal, AMSOIL
Antifreeze & Coolant is formulated with propylene glycol. It is
biodegradable and requires no special disposal costs or procedures in
most areas. Above all, its low toxicity presents no threat to children,
pets or wildlife.
Now, AMSOIL Antifreeze & Coolant provides even
greater benefits:
Lasts Longer
AMSOIL Antifreeze & Coolant contains a
proprietary poly organic acid technology. It eliminates the need for
periodic changing or recharging of cooling systems. There is no need
for supplemental coolant additives. AMSOIL Antifreeze & Coolant
provides extended service life in all gasoline and diesel vehicles. It
can be used for seven years or 250,000 miles in passenger cars,
light-duty trucks, vans and recreational vehicles. It lasts seven
years or 750,000 miles in over-the-road diesel trucks.
Compatible With Other Fluids
AMSOIL Antifreeze & Coolant is dyed neutral
yellow and is compatible with all ethylene and propylene antifreeze
and coolant formulations on the market, including DEX-Cool®,
Sierra®, and Zerex®. It is also compatible with fully formulated
diesel antifreezes and other organic acid technology (OAT) and hybrid
organic acid technology (HOAT) formulations.
Stops Leaks
AMSOIL Antifreeze & Coolant adheres to metal. It
self-seals hairline cracks in welds and seams to prevent leaks,
without additional stop-leak products or fibrous materials.
Prevents Metallic Corrosion
Independent tests reveal AMSOIL Antifreeze &
Coolant surpassed standards for metallic corrosion. It plates to metal
to protect even when exposed to acids and salt spray. Standard
allowances for loss in aluminum and solder are less than 60 mg. AMSOIL
Antifreeze & Coolant lost 0 mg in aluminum and less than 6 mg in
solder.
Standard for iron, steel, copper and brass allow a
maximum loss of less than 20 mg. AMSOIL Antifreeze and Engine Coolant
never exceeded 3 mg loss in any of those metals in a testing period
that was run for 10 weeks, three weeks longer than required tests.
|
