|
|
| ||||||||||||||||||||||||||||||||||||||
|
AMSOIL STM #10 Replaces The
Following Lubricants:
|
|
|
Spectro SK400 Shock & Fork Oil
|
Race Tech Medium |
|
Maxima Fork Oil 10 |
Belray HVI 10W
|
|
Ohlins Front Fork Fluid #15 |
Belray Fork 10W
|
|
Spectro Fork Oil 10W |
Klotz 10W |
|
Redline Medium
|
Spectro SPL Very Light
|
|
Harley Davisdson Fork Oil Type B
|
Fox Racing Oil
|
|
Harley Davidson Fork Oil Type E
|
|
AMSOIL STM #10 Is Recommended For Applications Specifying The Following:
Recommendations
AMSOIL Shock Therapy Suspension Fluids are
recommended for front forks and shocks on snowmobiles, motocross and cruiser
motorcycles, ATVs and other racing and recreational use vehicles, as well as
cars and trucks that require their suspension systems to perform in the most
extreme conditions. It is recommended the fluid be agitated before use.
AMSOIL Shock Therapy Suspension Fluid is available in two different viscosities.
AMSOIL Shock Therapy Suspension Fluid Light #5 (STL) is recommended for, but not limited to, Showa,® Kayaba,® Bilstein,® RydeFX,® Penske,® WP® forks, RACETECH® (US1) and Custom Axis® suspension systems. Use Shock Therapy Light #5 where less dampening and quicker rebounds are desired. It is also the preferred choice for winter use.
AMSOIL Shock Therapy Suspension Fluid Medium #10 (STM) is recommended for, but not limited to, Ohlin,® FOX,® RACETECH,® (US2), Koni,® WP® shocks and Harley-Davidson® forks that recommend type “E” or “B” fork oil. Use Shock Therapy Medium #10 where more dampening control and slower rebounds are desired.
Product
Availability
AMSOIL Shock Therapy Suspension Fluids are available
in quarts and 5-gallon pails.
|
TYPICAL TECHNICAL PROPERTIES
|
|
| AMSOIL SHOCK THERAPY SUSPENSION FLUID |
STM |
| Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
7.3 |
| Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
32.1 |
| Viscosity Index (ASTM D-2270) |
205 |
| Pour Point, °C [°F] (ASTM D-92) |
-48 [-54] |
| Flash Point, °C [°F] |
202 [396] |
| Fire Point, °C [°F] |
217 [423] |
| Four Ball Wear Test (ASTM D-4172: 40kg, 75°C, 1200 rpm, 1 hr) Scar Diameter, mm |
0.40 |
| Foam, ml (ASTM D-892) Sequence I, II, III |
65/0, 60/0, 65/0 |
| Blender Test (25°C, low speed, 1 min.) |
2.5 mins to settle, |
|
Copyright © 2010 Mark R.
Hansen, all rights reserved. |