1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum
PRODUCT
DESCRIPTION
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil (AFF) is specially
formulated for ATVs, UTVs, snowmobiles and other power sports applications.
Its broad viscosity range and wax-free formulation make it excellent for use
in both hot and cold temperature extremes. As an SAE 40 weight motor oil,
AMSOIL AFF provides outstanding protection for hot operating engines, while
its 0W rating and -60°F pour point ensure easy cranking, excellent cold
weather starting and quick post-startup protection. Formula 4-Stroke® Power
Sports is an extreme temperature lubricant that provides outstanding
performance in high performance, recreational or work/utility engines.
Resists Heat
and Thermal Breakdown
AMSOIL engineered Formula 4-Stroke® PowerSports Synthetic Motor Oil to
withstand the high temperatures of recreational engines. It effectively
resists oxidation and oil vaporization to prevent carbon/varnish formation,
control oil consumption and minimize exhaust emissions. AMSOIL AFF controls
oil thickening for good fuel economy, and it keeps engines clean for peak
operating efficiency.
Excellent For
Transmissions
AMSOIL Formula 4-Stroke® PowerSports Oil is wet clutch compatible and
contains no friction modifiers, making it ideal for both two- and
four-stroke ATV transmissions. The friction modifier-free formulation is
designed to prevent clutch slippage, delivering maximum torque and power to
the wheels – a critical feature for towing or high-horsepower engines.
AMSOIL AFF meets the frictional requirements of JASO MA/MA2.
Superior Wear
Protection
AMSOIL AFF is formulated with high levels of anti-wear additives that
provide excellent protection for pistons, bearings and gears in transmission
containing units, while its shear stable, SAE 40 viscosity delivers a thick
lubricating film for an extra margin of protection in hard working engines.
Anti-Foam
Churning occurs in high RPM engines that can cause oil to foam, depleting
its lubricating abilities and increasing heat and wear. AMSOIL AFF controls
foam, promoting cooler engine operation and reduced wear.
Special
Additives
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil contains robust
dispersant/detergent additives that effectively neutralize the high levels
of acids and combustion by-products prone to small engines. And it is
anti-rust fortified for superior rust prevention, which is especially
important in seasonally or infrequently used power sports equipment.
Applications and
Recommendations
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil is recommended for
four-stroke engines and transmissions on two- or four-stroke powered
applications. It is an all climate/all season oil that replaces 0W-30,
0W-40, 5W-30, 10W-30 and 10W-40 oils for ATVs, UTVs, snowmobiles and other
power sports equipment. Manufacturers include Polaris®, Honda®, Yamaha®,
Ski-Doo®, Can-Am® (Bombardier®), Suzuki®, Kawasaki® and Arctic Cat®.
• API SL/CF, SJ, SH, SG
• JASO MA/MA2
• ISO-L-EMA2
Compatibility
AMSOIL Formula 4-Stroke® PowerSports is compatible with conventional and
synthetic motor oils. Mixing AMSOIL motor oils with other oils, however,
will shorten the oil life expectancy and reduce the performance benefits.
AMSOIL does not support extended drain intervals where oils have been mixed.
Aftermarket oil additives are not recommended for use with AMSOIL motor
oils.
Service Life
Follow the equipment manufacturer’s recommended drain intervals.
Health & Safety
This product is not expected to cause health concerns when used for the
intended application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available upon request at 715-392-7101
or on the
AMSOIL Website. Keep Out of Reach of Children. Don’t pollute. Return
used oil to collection centers.
|
TYPICAL TECHNICAL PROPERTIES
|
|
AMSOIL
FORMULA 4-STROKE® POWER SPORTS SYNTHETIC MOTOR OIL SAE
0W-40 (AFF)
|
|
Kinematic Viscosity @
100°C, cSt (ASTM D-445)
|
14.7
|
|
Kinematic Viscosity @
40°C, cSt (ASTM D-445)
|
83.7 |
|
Viscosity Index (ASTM
D-2270)
|
184 |
|
CCS Viscosity, cP @
(-35°C) (ASTM D-5293)
|
6139 |
|
Flash Point °C (°F)
(ASTM D-92)
|
226 (439) |
|
Pour Point °C (°F) (ASTM D-97)
|
-51 (-60) |
|
Noack Volatility, %
weight loss (g/100g) (ASTM D-5800)
|
7.3% |
|
Four Ball Wear Test
(ASTM D-4172B: 40 kg, 75°C, 1200 rpm, 1 hour), Scar, mm
|
0.35 |
|
Total Base Number
|
10.5 |
