1-Quart Bottle
1-Quart Bottles (case of 12)
1-Gallon Bottle
1-Gallon Bottles (case of 4)
2.5-Gallon Bottle
2.5-Gallon Bottles (case of 2)
30-Gallon Drum
55-Gallon Drum
PRODUCT DESCRIPTION
AMSOIL Series 3000 100% Synthetic 5W-30 Heavy Duty Diesel Oil
(HDD) delivers extraordinary lubrication in both diesel and gasoline engines
found in commercial, fleet and personal vehicles. By combining the
industry’s premier synthetic technology with AMSOIL premium additives,
AMSOIL Series 3000 exceeds the higher performance demands of modern engines.
It withstands the stress of higher heat, higher acid levels and excessive
soot-loading found in EGR-equipped engines. AMSOIL Series 3000 Synthetic
5W-30 Heavy Duty Diesel Oil consistently outperforms conventional and
synthetic diesel oils for long-lasting performance and protection.
AMSOIL, the leader in automotive synthetic
lubrication, produced the world’s first API qualified synthetic motor oil in
1972. Trust the extensive experience of AMSOIL The First in Synthetics® to
do the best job protecting your engine.
Extends Drain Intervals
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil can extend drain
intervals far beyond those recommended for conventional oils. Its unique
synthetic formulation and long-drain additive system deliver maximum engine
protection, cleanliness and performance over extended drain intervals,
reducing vehicle maintenance and waste oil disposal costs.
Maximizes Fuel Economy
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is energy efficient for reduced
fuel costs. Its low viscosity minimizes “drag” associated with
high-viscosity oils, allowing the engine to operate more freely, maximizing
power and fuel economy.
Maximum Protection Against Engine
Wear
Even under high temperatures and pressures, AMSOIL Series 3000 Diesel Oil’s
superior film strength and anti-wear additives help prevent metal-to-metal
contact. AMSOIL Series 3000 reduces ring wear, cylinder bore polishing, oil
consumption and valve train wear for improved engine life and lower
maintenance costs.
Controls Soot Thickening and Wear
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is heavily fortified with
detergent/dispersant additives and is naturally resistant to soot. It is
designed to keep soot particles suspended independently and prevent them
from attaching together to form larger, wear-causing particles. Viscosity
increase is minimized and soot-related wear is controlled.
Reduces Oil Consumption and
Emissions
AMSOIL Series 3000 loses only 7.6% of its mass to high-temperature
volatility (evaporation) in the NOACK test, outperforming all conventional
oils. Because less oil vapor passes into the combustion chamber, oil
consumption and emissions are reduced. Additionally, lower volatility helps
AMSOIL 5W-30 Diesel Oil retain its viscosity after high-temperature service
for continued dependable protection and excellent fuel economy.
Excels in Extreme Temperatures
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil resists thermal
(heat) breakdown, oxidation and sludge formation better than conventional
oils. And unlike conventional petroleum oils, AMSOIL HDD contains no wax. It
stays fluid down to -50°C (-58°F) for improved cold-temperature oil flow,
reduced bearing wear and easier starting.
APPLICATIONS
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is recommended for diesel
engines, gasoline engines and other applications that require any of the
following worldwide specifications:
• API CI-4+, CF, SL • ACEA A3/B3, E2 •
Global DHD-1 • JASO DH-1 • Mack EO-M+, EO-N Premium Plus ’03 • DDC Power
Guard 93K214 • Caterpillar ECF-1-a, ECF-2 • Cummins CES 20071, 20072, 20076,
20077, 20078 • Volvo VDS-2, VDS-3 • MB 228.1, 228.3, 229.1 • MAN 271/3275 •
MTU Type 2
MIXING AMSOIL
AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil is compatible with
conventional and synthetic motor oils. Mixing AMSOIL motor oils with other
oils, however, will shorten the oil life expectancy and reduce the
performance benefits. AMSOIL does not support extended drain intervals where
oils have been mixed.
Aftermarket oil additives are not
recommended for use with AMSOIL motor oils.
SERVICE LIFE
AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil (HDD) is recommended for
extended drain intervals in engines that are unmodified and in good
operating condition.
Diesel Engine Service
- Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600
hours or one year, whichever comes first. Drain intervals may be
extended further with oil analysis.
Gasoline Engine Service
- Normal Service – Up to 25,000 miles or one year, whichever comes
first, or longer based on oil analysis.
- Severe Service – Up to 15,000 miles or one year, whichever comes
first, or longer based on oil analysis.
*Operating conditions and drain intervals for severe and
normal service are defined by the OEM. Refer to your owner’s manual.
Note: Extended drain intervals are not
recommended when using biofuels containing >10% ethanol or 5% biodiesel
(B5). Follow OEM drain intervals or extend drain intervals with oil
analysis.
AMSOIL Ea and Donaldson Endurance full flow
oil filters are designed for extended drain intervals. They stop smaller
particles, have less restriction and last longer than regular filters. For
best performance, use AMSOIL Ea or Donaldson Endurance oil filters.
AMSOIL
Ea By-Pass Oil Filters are
specialized for the removal of small, wear-causing dirt particles, thereby
extending engine life. AMSOIL encourages using an AMSOIL Ea By-Pass
Filtration System for maximum engine and oil life.
Oil
Analyzers Inc. (715-395-0222) is a division of AMSOIL that provides
cost-effective, quality oil analysis services.
Health & Safety
This product is not expected to cause health concerns when used for the
intended application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available upon request at 715-392-7101
or simply click
here for a PDF version. Keep Out of Reach of Children. Don’t
pollute. Return used oil to collection centers.
|
TYPICAL TECHNICAL PROPERTIES
|
|
AMSOIL Series
3000 Synthetic 5W-30 Heavy-Duty Diesel Oil (HDD)
|
|
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445)
|
11.7
|
|
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445)
|
67.8
|
|
Viscosity Index
(ASTM D-2270)
|
169
|
|
Cold Crank
Simulator Apparent Viscosity @ -30°C, cP (ASTM
D-5293)
|
5276
|
|
Pour Point °C (°F)
(ASTM D-97)
|
-50 (-58)
|
|
Flash Point °C
(°F) (ASTM D-92)
|
226 (439)
|
|
Fire Point °C (°F)
(ASTM D-92)
|
244 (471)
|
|
Noack Volatility (DIN 51581) 250°C for 1
hour, % weight loss
|
7.6
|
|
High Temperature/High Shear Viscosity, cP,
150°C, 1.0 x 106 s-1 (ASTM D-5481)
|
3.5
|
|
Four-Ball Wear Test (ASTM D-4172: 40kg, 75°C,
1200 rpm, 1 hr) Scar diameter, mm
|
0.35
|
|
Total Base Number
|
12.1
|
