1-Gallon Bottle
1-Gallon Bottles (case of 4)
30-Gallon Drums
55-Gallon Drums
PRODUCT DESCRIPTION
AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) is formulated
with premium synthetic base oils that exceed both 10W-30 multi-grade and SAE
30 straight-grade viscosity requirements for outstanding performance in
modern and older diesel engines. Unlike conventional SAE 30 motor oils,
AMSOIL ACD has a naturally high viscosity index and does not contain
paraffin (wax). It has a -33°F pour point and qualifies for SAE 10W, making
it an all-season multigrade lubricant with a wide operating temperature
range. AMSOIL ACD is formulated without viscosity index (VI) improvers. This
shear-stable formulation is designed to stop viscosity loss and associated
bearing and cylinder bore wear. AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty
Diesel Oil contains premium additives with a high 12 TBN to neutralize acids
from blow-by, exhaust gas recirculation (EGR) and high-sulfur diesel fuels.
It protects against damaging piston deposits, ring sticking and sludge.
AMSOIL, the leader in automotive synthetic
lubrication, produced the world’s first API qualified synthetic motor oil
back in 1972. Trust the extensive experience of AMSOIL The First in
Synthetics® to do the best job protecting your equipment.
PERFORMANCE
Where these viscosity grades are specified, AMSOIL Synthetic 10W-30/SAE 30
Diesel Oil provides outstanding performance as a straight-grade SAE 30 for
older two- and four-stroke diesels and as a multi-grade SAE 10W-30 in modern
four-stroke diesel and gasoline engines. AMSOIL Synthetic Heavy Duty Diesel
Oil is ideal for use in a wide variety of light and heavy-duty applications,
including agriculture, off-road construction, trucking, mining, industrial
(pumps and generators) and personal automotive or commercial transportation.
It is recommended for use with low- or high-sulfur diesel fuels in standard,
turbocharged or supercharged engines, all off-road engines and pre-2007
on-road engines.
• SAE 10W-30 performance without VI
improvers
• Cost-effective replacement for conventional oils
• Excellent shear stability
• Outstanding wear protection
• Superior protection over a broad range of operating temperatures
• Extended service life with
oil
analysis
APPLICATIONS
AMSOIL ACD is recommended for diesel
engines and other applications requiring any of the listed worldwide
specifications and gasoline engines requiring API SL, SJ, SH... or ACEA A3.
• API CI-4+/CH-4/CG-4/SL
• API CF/CE/CD/CC
• API CF-2/CD-II
• Global DHD-1
• ACEA A3/B3, E3, E5
• JASO DH-1
• Mack EO-M+, EO-N Premium Plus ’03
• Detroit Diesel Power Guard 93K214
• Caterpillar ECF-1 a, ECF-2
• Cummins CES 20076/20077/20078 (current), 20071/20072 (older)
• Volvo VD5-3, VD5-2
• Mercedes Benz 228.1/228.3/229.1
• MAN 271/3275
• MTU Type 1
MIXING AMSOIL
AMSOIL ACD is compatible with conventional and synthetic motor oils,
however, mixing AMSOIL ACD with other oils will shorten the oil life
expectancy and reduce the performance benefits. AMSOIL does not support
extended drain intervals where AMSOIL ACD has been mixed with another
product.
Aftermarket additives are not
recommended for use with AMSOIL ACD.
SERVICE LIFE
AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) is
recommended for extended drain intervals in engines that are unmodified and
in good operating condition.
Diesel Engine Service
- Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600
hours or one year, whichever comes first. Drain intervals may be
extended further with oil analysis.
Gasoline Engine Service
- Two times (2X) OEM* recommendation, not to exceed 15,000 miles or
one year, whichever comes first.
*Operating conditions and drain intervals for severe and
normal service are defined by the OEM. Refer to your owner’s manual.
Note: Extended drain intervals are not
recommended when using biofuels containing >10% ethanol or 5% biodiesel
(B5). Follow OEM drain intervals or extend drain intervals with oil
analysis.
AMSOIL Ea™ and Donaldson Endurance™ full
flow oil filters are designed for extended drain intervals. They stop
smaller particles, have less restriction and last longer than regular
filters. For best performance, use AMSOIL Ea or Donaldson Endurance oil
filters.
AMSOIL
Ea By-pass oil filters are
specialized for the removal of small, wear-causing dirt particles, thereby
extending engine life. AMSOIL encourages using an AMSOIL Ea By-pass filter
system for maximum engine and oil life.
Oil
Analyzers Inc. (715-395-0222) is a division of AMSOIL that provides
cost-effective, quality oil analysis services.
Health & Safety
This product is not expected to cause health concerns when used for the
intended application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available upon request at 715-392-7101
or simply click
here for a PDF version. Keep Out of Reach of Children. Don’t
pollute. Return used oil to collection centers.
TYPICAL TECHNICAL PROPERTIES
Synthetic 10W-30/SAE 30 Diesel Oil
(ACD) |
| Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
10.5
|
| Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
66.3
|
| Viscosity Index (ASTM D-2270) |
141
|
| Cold Crank Simulator Apparent Viscosity @ -25°C,
cP (ASTM D-5293) |
5917
|
| Pour Point °C (°F) (ASTM D-97) |
-36 (-33)
|
| Flash Point °C (°F) (ASTM D-92) |
230 (446)
|
| Fire Point °C (°F) (ASTM D-92) |
248 (478)
|
| Noack Volatility, % weight loss (g/100g) (ASTM
D-5800) |
6.7
|
| Four Ball Wear Test (ASTM D-4172B @ 40 kg
pressure, 75°C, 1200 rpm, 1 hr), Scar, mm |
0.40
|
| Total Base Number |
12.0
|
